| Service Name | Related Standard |
| Tensile (0 °) test sample preparation with 3-axis CNC router |
EN2561, EN ISO 527 |
| Tensile (dog bone) test sample preparation with 3-axis CNC router |
EN ISO 527 |
| Tensile (90°) test sample preparation with 3-axis CNC router |
EN2597, EN ISO 527 |
| Compression (0°/90°) test sample preparation with 3-axis CNC router |
ASTM D3410 |
| IPSS (±45°) test sample preparation with 3-axis CNC router |
prEN 6031 |
| Flexure test sample preparation with 3-axis CNC router |
EN 2562, EN ISO 178, EN ISO 14125 |
| CAI test sample preparation with 3-axis CNC router |
EN 6038 |
| DMA test sample preparation with 3-axis CNC router |
ASTM D4065 |
| Pyknometer test sample preparation with 3-axis CNC router | ISO 1183-3 |
| Chemical Dissolution test sample preparation with 3-axis CNC router |
EN 2564 |
| Dipping test sample preparation with 3-axis CNC router |
ASTM D792 |
| ILSS test sample preparation with 3-axis CNC router |
EN 2563, EN 2377 |
| Tensile (dog bone) test sample preparation with injection molding |
EN ISO 527 |
| Impact test sample preparation with injection molding |
EN ISO 179 |
| Flexure test sample preparation with injection molding |
EN ISO 178 |
| UL-94 test sample preparation with injection molding | UL-94 |
| MFR and MVR test |
ISO 1133-1 |
| Density measurement by dipping method |
ASTM D792 |
| Sample preparation by double disc metallographic polishing and grinding machine |
ASTM E3-11 |
| The Name of the Test | Related Standards |
| Plastics – Determination of Tensile Properties (Zwick Universal Testing Machine) | EN ISO – 527 |
| Tensile Test Parallel to the Direction (Zwick Universal Testing Machine) | BS EN 2561 |
| Carbon Fiber Reinforced Plastics, Unidirectional Laminates-Tensile Test Perpendicular to the Fiber Direction (Zwick Universal Testing Machine) | BS EN 2597 |
| Determination of in-Plane Shear Properties (±45º tensile test) (Zwick Universal Testing Machine) | PrEN 6031 |
| Plastics – Determination of Flexural Properties (Zwick Universal Testing Machine) | EN ISO – 178 |
| Fiber- Reinforced Plastic Composites- Determination of Flexural Properties (Zwick Universal Testing Machine) | EN ISO – 14125 |
| Carbon Fiber Reinforced Plastics – Unidirectional Laminates – Flexural Test Parallel to the Fiber Direction (Zwick Universal Testing Machine) | BS EN 2562 |
| Carbon Fiber Reinforced Plastics — Unidirectional Laminates-Determination of the Apparent Interlaminar Shear Strength (Zwick Universal Testing Machine) |
BS EN 2563 |
| Specification for Glass Fiber Reinforced Plastics. Test Method. Determination of Apparent Interlaminar Shear Strength (Zwick Universal Testing Machine) | BS EN 2377 |
|
Plastics -Multipurpose Test Specimens (Zwick Universal Testing Machine and Charpy Impact Test Machine ) |
ISO 3167 |
| Compression Test Parallel to Fiber Direction (Zwick Universal Testing Machine) | BS EN 2850 |
| Standard Test Method for Compressive Properties of Rigid Plastics (Zwick Universal Testing Machine) | ASTM D 695 |
| Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading (Zwick Universal Testing Machine) | ASTM D 3410 |
| Aerospace Series – Fiber Reinforced Plastics – Test Method – Determination of Notched, Unnotched and Filled Hole Compression Strength (Zwick Universal Testing Machine) | BS EN 6036 |
| Determination of the Compression Strength After Impact (Zwick Universal Testing Machine) | BS EN 6038 |
|
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event (Zwick Universal Testing Machine and Drop Tower Impact Test Machine) |
ASTM D7136 |
| Determination Of Interlaminar Fracture Toughness Energy, Gıc and Gııc (Zwick Universal Testing Machine) | BS EN 6033 ve BS EN 6034 |
|
Plastics — Determination of Charpy Impact Properties Part 1: Non-Instrumented Impact Test (Charpy Impact Test Machine And Notch Making Machine) |
EN ISO – 179 |
|
Aerospace Series. Fiber Reinforced Plastics. Standard Procedures for Conditioning Prior to Testing Unaged Materials (Climate Chamber) |
BS EN 2743 |
| Standard Practice for Conditioning Plastics for Testing (Climate Chamber) | ASTM D618 |
| Plastics — Standard Atmospheres for Conditioning and Testing (Climate Chamber) | EN ISO 291 |
|
Aerospace Series Fiber Reinforced Plastics Determination of the Effect of Exposure to Humid Atmosphere on Physical and Mechanical Characteristics (Climate Chamber) |
prEN 2823 |
| Aerospace Series – Fiber Reinforced Plastics – Determination of the Conditions of Exposure to Humid Atmosphere and of Moisture Absorption (Climate Chamber) | prEN 3615 |
|
Plastics — Determination of Creep Behaviour Part 1: Tensile Creep (Creep testing Machine) |
TS 3823-1 EN ISO 899 |
| The Name of the Test | Related Standards |
| Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pycnometer method |
BS EN ISO 1183-3 |
|
Plastics – Determination of dynamic mechanical properties Part 1: General principles Plastics — Determination of dynamic mechanical properties Part 2: Torsion-pendulum method” |
BS EN ISO 6721-1, 6721-2 |
| Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
ASTM D4065-12 |
| Plastics — Determination of dynamic mechanical properties Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer |
BS EN ISO 6721-10 |
| “Plastics — Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height” |
BS EN ISO 11357-2 |
| “Plastics — Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization” |
BS EN ISO 11357-3 |
| Plastics – Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity |
BS EN ISO 11357-4 |
| “Plastics — Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)” |
BS EN ISO 11357-6 |
| “Plastics — Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics” |
BS EN ISO 11357-7 |
| “Plastics — Thermogravimetry (TG) of polymers Part 1: General principles” |
BS EN ISO 11358-1 |
| Standard Practices for General Techniques of Infrared Quantitative Analysis |
ASTM E168 – 16 |
| Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
ASTM E1252 – 98 |
| The Name Of The Test | The Method That Is Used |
| DTPA Extractable Cu, Zn, Fe, Mn Determination in Soil Samples (AAS) | AAS |
| Determination of Exchangeable Na and K in Soil Samples (Flame Photometer) | Photometric |
| Determination of Nitrogen in Soil Samples (Kjeldahl Device) | Kjeldahl |
| Determination of Lime Content in Soil Samples (Schiebler Calsimeter) | Schiebler Calsimeter |
| Determination of Electrical Conductivity in Soil Samples (EC meter) | Conductometric |
| Determination of pH in Soil Samples (pH meter) | Potentiometric |
| Determination of Plant Available Phosphorus in Soil Samples (UV-Vis Spectrophotometer) | Spectrophotometric |
| Determination of Plant Available Boron in Soil (UV-Vis Spectrophotometer) | Spectrophotometric |
| Determination of Exchangeable Ca and Mg in Soil Samples (Automatic Titration System) | Titrimetric |
| Alt yapı ismi |
Alt yapı özellikleri |
Ürün çıktısı özellikleri |
| 1. Termoplastik matrisli UD prepreg üretim hatları | 300mm ürün genişliği Proses sıcaklıkları:50°-450°. Modüler yapılandırılabilme. Farklı kaplama tekniklerinin denenmesi. %100 yerli üretim(MİR Ar-Ge). | Karbon elyaf ve cam elyaf takviyesi yapılabilmektedir. PEEK,PPS,PA66,PA12,PP gibi bir çok termoplastik matris işlenebilmektedir. İstenilen Fiber-hacim oranı ve ürün genişliği imkanı. |
| 2. Termoplastik matrisli UD prepreg üretim hattı | Max 500 mm ürün genişliği. Proses sıcaklığı 100-420°. Farklı kaplama tekniklerinin denenmesi. | Karbon elyaf ve cam elyaf takviyesi yapılabilmektedir. PEEK,PPS,PA66,PA12,PP gibi bir çok termoplastik matris işlenebilmektedir. İstenilen Fiber-hacim oranı ve ürün genişliği imkanı. |
| Termoplastik dokuma prepreg üretim hattı | Max 1300 mm ürün genişliği. Proses sıcaklığı: 100-420°. | Karbon elyaf takviyesi ve PEEK,PPS,PA66,PA12,PP gibi bir çok termoplastik matris işlenebilmektedir. Cam elyaf takviyesi ile 220°’ye kadar proses edilebilmektedir. İstenilen Fiber-hacim oranı ve ürün genişliği imkanı. |
| Termoset matrisli UD ve dokuma prepreg üretim hattı | Max 600 mm ürün genişliği. Proses sıcaklığı 50-400°C5 farklı kaplama sistemi. Hava ile ısıtma sistemleri. | Karbon elyaf ve cam elyaf takviyesi yapılabilmektedir. Termoset reçineler kullanılabilmektedir. İstenilen Fiber-hacim oranı ve ürün genişliği imkanı. |
| Yüksek sıcaklık otoklavı | 1000 mm genişlik ve 2500 mm’ye kadar ürün imkanı. Max. 24 bar azotla basınçlandırma. Max. 420° çalışma sıcaklığı. 10 vakum kanalı ve 20 termokupl kontrolü yapılabilmektedir. | Termoplastik ve Termoset kompozit yapıların üretimde kullanılabilmektedir. |
| Name of test | Related standard |
| Water based surface embedded heating and cooling systems. Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
BS EN 1264-2:2008+A1:2012 |
| Water based surface embedded heating and cooling systems – Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls – Determination of the thermal output |
TS EN 1264-5:2010 |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels for space heating. Test method for thermal output |
BS EN 14037-2 :2016 |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C. Prefabricated ceiling mounted radiant panels for space heating. Rating method and evaluation of radiant thermal output |
BS EN 14037-3 :2016 |
| Radiators and convectors. Test methods and rating |
BS EN 442-2 :2015 |
| Moderate thermal environments-Determination of the PMV and PPD indices and specification of the conditions for thermal comfort |
TS EN ISO 7730 :2016 |
| Method of Testing for Rating Ceiling Panels for Sensible Heating and Cooling |
ANSI/ASHRAE 138-2013 (R2016) |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C. Pre-fabricated ceiling mounted radiant panels. Test method for cooling capacity |
BS EN 14037-4:2016 |
| Free hanging heating and cooling surfaces for water with a temperature below 120°C. Open or closed heated ceiling surfaces. Test method for thermal output |
BS EN 14037-5:2016 |
| Ventilation for buildings. Chilled ceilings. Testing and rating |
BS EN 14240:2004 |
| Thermal Environmental Conditions for Human Occupancy |
ANSI/ASHRAE 55-2017 |